Samsung Laundry Combo WD53DBA9 H Serie Manuel D'utilisation page 62

Maintenance
Keep the Laundry Combo clean to prevent deteriorated performance and to preserve its life cycle.
WARNING
• Certain internal parts are intentionally not grounded and may present a risk of electric shock only
during servicing. Service personnel – Do not contact the following parts while the appliance is
energized: Control board, heat sink, motor, inlet valve and pump.
• Sharp Edges - To reduce the risk of injury, use care when cleaning the condenser or evaporator coil fins.
Product Care
The Product Care screen offers maintenance tips to keep your Laundry Combo clean and prolong the
product life cycle.
You can check the remaining number of cycles until the next Self Clean+ and Self Dry duration, and start
the Self Clean+ or Self Dry cycle.
NOTE
If the Product Care cycle needs to be performed, a guide message will appear on the Home screen. Follow
the on-screen instructions to run the Self Clean+ or Self Dry cycle.
1. On the Home screen tap Product Care to move to the Product Care screen.
2. Tap Clean now or Start cleaning under the desired option to start the care cycle.
- All the options for the Product Care cycle are set automatically.
- If both the drum and the heat exchanger require cleaning, all the necessary options for the Product
Care cycle are set automatically.
3. Tap to move to the Home screen.
62 English
Untitled-15 62 Untitled-15 62 2024-07-11 2024-07-11 3:47:46 3:47:46