Publicité
Les langues disponibles
Les langues disponibles
Problem
Excessive vibrations or
makes noise.
Does not drain and/or
spin.
Untitled-15 79
Untitled-15 79
• Make sure the Laundry Combo is installed on a level, solid floor that is
not slippery. If the floor is not level, use the leveling feet to adjust the
height of the Laundry Combo.
• Make sure the shipping bolts are removed.
• Make sure the Laundry Combo is not in contact with any other object.
• Make sure the laundry load is balanced.
• The motor can cause noise during normal operation.
• Overalls or clothes with metallic decorations can cause noise while
being washed. This is normal.
• Metal objects such as coins can cause noise. After washing, remove
these objects from the drum or filter case.
• The spinning process is not performing properly because there is not
enough laundry or the load is unbalanced.
-
Add more laundry or redistribute the items, then tap Start to restart
the washer. Or, turn off the product and turn it back on after 2-3
minutes, then try again.
• Remove any items stuck inside the lint filter.
• Make sure the drain hose is not kinked between the unit and drain
system. If you encounter a drain problem, call for service.
• Make sure the drain filter is not clogged.
• Close the door and tap and hold
For your safety, the Laundry Combo will not tumble or spin unless the
door is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system that is not
clogged.
• If the Laundry Combo is not supplied with sufficient power, the Laundry
Combo will temporarily not drain or spin. As soon as the Laundry Combo
regains sufficient power, it will operate normally.
• Make sure the drain hose is positioned correctly, depending on the
connection type.
• Clean the drain filter as it may be clogged.
Action
.
English 79
2024-07-11
2024-07-11
3:47:50
3:47:50
Publicité
