Air Supply - Jydepejsen EOS Mode D'emploi

To meet these conditions, Jydepejsen has developed an air supply system for EOS that contains
three individual air systems (see ill.)
Air supply for lighting:
Air supply for lighting supplies air directly into the bottom of the combustion chamber, throgh
the front vermiculite parts. By sliding the air vent to a fully open position, the air supply for
lighting is at a maximum.
Air supply for combustion:
The air supply for combustion supplies the re with a much bigger amount of air, and contri-
butes considerably to a good combustion. This air system also keeps the glass clean - due to the
vertical air slits along the glasses, the air is pulled along them and in this way, makes sure that
they stay clean. The air supply for combustion is also controlled by sliding the air vent.
Direct air:
Direct air ist supplied through the back vermiculite panel, and secures a nal combustion of gas-
ses in the top of the combustion chamber. The direct air supply cannot be adjusted, which is a
guarantee for a good combustion, also when the re is supplied with a minimum of combustion
air.

AIR SUPPLY

Air supply for combustion
Air supply for lighting Direct air