Publicité
Les langues disponibles
Les langues disponibles
Replacing the vermiculite panels
(You should also follow these instructions when cleaning your stove, as clean-
ing necessitates the removal of the combustion chamber cladding).
1. Position the two back panels - side - at each side, behind the back,
vertical pipe.
2. Position the back panel between the two back panels - side. First, the
top of the back panel must be xed, before the lower part is pushed all
the way to the back.
3. Position the two front panels - side - at each side (right no. 55800040
- left no. 55800038). First, the top of the back panel must be xed, before the
lower part is pushed all the way to the back.
4. Position the two side panels at each side, between the back, vertical pipe
and the front panel - side.
5. Place the bottom plate - now all other panels are xed.
6. Position the front panel - middle between the two front vertical air lips, t
ting it over the small pipe piece, protruding from the bottom plate.
7. Place the ba e plate, on top of the steel ring in the top of the combustion
chamber. Push it backwards against the back panels, which are hereby xed.
2 front panels
- side
Front panel - middle
Ba e plate
Back panel - midd-
2 Back panels
- side
Bottom plate
2 side panels
Publicité
