Powerfix Profi HG01477A-1 Instructions D'utilisation Et Consignes De Sécurité page 8

LUGGAGE STRAP SET (HG01477A-1)
RATCHET STRAPS WITH QUICK-RELEASE FASTENING
(HG01477A-2)
List of pictograms used
Lashing capacity (straight pull)
Do not use for non-linear pulls
Introduction
Q
We congratulate you on the purchase of your new product. You have chosen a
high quality product. Familiarise yourself with the product before using it for the
first time. In addition, please carefully refer to the operating instructions and the
safety advice below. Only use the product as instructed and only for the indicated field of
application. Keep these instructions in a safe place. If you pass the product on to anyone
else, please ensure that you also pass on all the documentation with it.
Intended use
Q
The product is designed to lash, attach and secure loads. The lashing straps serve to "press"
the load down to the loading surface of a vehicle or to connect it directly with the vehicle.
They are not designed to lift or carry loads. The permissible load must not be exceeded.
Any use other than previously mentioned or any product modification is prohibited and can
lead to injuries and / or product damage. The manufacturer is not liable for any damages
caused by any use other than for the intended purpose. The product is not intended for
commercial use.
Technical data
Q
HG01477A-1
Length:
Permissible load (L
Material:
HG01477A-2
Length:
Permissable load (LC):
Material:
6 GB/IE/NI
LGF (length – fixed end): 0.5 m
LGL (length – adjustable end): 3.5 m
): 125 daN (1250 N = Newton / 125 kg (m / s
C
25daN
Polypropylene (PP)
approx. 2.5 m
125 daN (1250 N = Newton / 125 kg (m / s2)) /
Looped: 250 daN
Polypropylene (PP)
Lashing capacity (non-linear pull)
)) / S
2
HF