Publicité
Les langues disponibles
Les langues disponibles
Safety guidelines for battery chargers
This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person .
The charger is suitable for indoor use
only .
WARNING!
■
If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards .
Original accessories/auxiliary
equipment
■
Use only the accessories and additional
equipment that are specified in the oper-
ating instructions and are compatible with
the appliance. Using attachments or accessory
tools other than those recommended in the oper-
ating instructions can lead to a risk of injury .
■
20
│
GB │ IE
Information on saw blades
You can use any saw blade provided it is fitted with
a suitable mount – 1/2" (12 .7 mm) universal shaft .
Saw blades optimised for your sabre saw are
available from retail stores in different lengths for
various purposes .
NOTE
►
TPI = teeth per inch = the number of teeth
per 2 .54 cm
Wood saw blade:
Dimensions: 152 .5 x 0 .9 mm, 6 - 12 TPI
Ideal for: sawing construction wood, chipboard,
panels and plywood, and also plunge cuts .
Before use
Charging the battery pack (see fig . A)
CAUTION!
►
Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger .
NOTE
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C .
♦
Connect the battery pack
battery charger
♦
Insert the power plug into the socket .
The control LED
♦
The green LED
indicates that the charging
process is complete and the battery pack
ready .
to the high-speed
(see fig . A) .
lights up red .
PSSA 20-Li A1
is
Publicité
