Publicité
Les langues disponibles
Les langues disponibles
Adjusting the rotational speed
You can use the adjusting wheel for speed pre-
selection
to preselect the rotational speed:
(1 = slower speed, 6 = faster speed).
We recommend you carry out practice tests to
determine the correct speed.
The speed can also be changed during operation.
Maintenance and cleaning
WARNING! RISK OF INJURY!
Always switch the appliance off and
remove the battery before carrying
out any work on the appliance.
The battery angle grinder is maintenance-free.
■
Do not use any sharp objects for cleaning the
appliance. Never permit liquids to penetrate
inside the appliance. Otherwise the appliance
could be damaged.
■
Clean the appliance regularly, preferably imme-
diately after completion of the work.
■
Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners which can attack the
plastic.
■
A vacuum cleaner is required for thorough
cleaning of the appliance.
■
Ventilation openings must never be obstructed.
■
Remove any sanding dust stuck to the appliance
with a brush.
NOTE
►
Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
WARNING!
►
Do not use any accessories not recommend-
ed by PARKSIDE. This can lead to electric
shock and fire.
PWSA 20-Li B3
Disposal
The packaging consists of environ-
mentally friendly material. It can be
disposed of in the local recycling
containers.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools be
collected separately and recycled in an environ-
mentally compatible manner.
Do not dispose of batteries in
your normal household waste!
Remove the batteries from the appli-
ance before disposal.
Defective or worn-out rechargeable
batteries must be recycled according to Directive
2006/66/EC. Take the battery pack and/or appli-
ance to a nearby collection facility.
Please consult your local authorities regarding
suitable disposal of worn out power tools/battery
packs.
Dispose of the packaging in an envi-
ronmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary. The packag-
ing material is labelled with abbreviations (b) and
numbers (a) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
GB │ IE
│
31
■
Publicité
