Parkside 314188 2001 Traduction Des Instructions D'origine page 23

Package contents
1 angle grinder
1 additional handle
1 blade guard
1 two-hole assembly spanner
1 cutting disc
2 spare carbon brushes
1 set of operating instructions
Technical specifications
Rated voltage
Rated power consumption
Rated idle speed
Disc size
Thread size
Protection class
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Noise emission value
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Total vibration value
Surface grinding
Uncertainty
PWS 125 F5
230 V ∼ 50 Hz (AC)
1200 W
n 3000–12000 rpm
Ø 125 mm
M14
II /
(double insulation)
L = 91.6 dB (A)
PA
K = 3 dB
L = 102.6 dB (A)
WA
K = 3 dB
a = 10.129 m/s 2
h, AG
K = 1.5 m/s 2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and noise
emission values can also be used to make a
provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece being worked, the
vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting
the working time. Wherein all states of oper-
ation must be included (e.g. times when the
power tool is switched off and times where
the power tool is switched on but running
without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
GB │ IE │
19 ■