SilverCrest SSTME 600 A1 Mode D'emploi page 29

6) Place the filled and closed blender 3 on the motor block 6. To do this, use
the recesses on the motor block 6 and ensure that the arrow
blender is pointing to the
clockwise to position
the blender 3 is fitted flush.
Selecting the speed setting
Once the blender 3 is filled and sitting completely closed on the motor block 6,
you can switch on the appliance.
Set the switch 5 to ...
■ Level 1 – 3
for liquids or soft foodstuffs, for mixing, blending and stirring
■
Level 3 – 5
for more solid foods or for chopping
■ Level P (pulse function)
for short, powerful impulse operation, e.g. for crushing ice cubes or when
cleaning. To prevent overloading the motor, the switch 5 does not lock in this
position. Therefore, hold the switch 5 in this position for short periods only.
NOTE
Fill the blender 3 with a maximum of 180 g of ice cubes.
►
Otherwise, the ice cubes will not be crushed optimally.
Filling while in use
WARNING!
► If you want to add additional foods during operation, use only the measuring
cap 1 provided for this purpose. Do NOT open the lid 2.
Do not insert cutlery items or mixing tools into the blender 3 while the
►
appliance is in use. There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades 4!
To add more food while the appliance is in use, ...
1) Remove the measuring cap 1 from the lid 2.
2) Add the ingredients.
3) Press the measuring cap 1 back into the lid.
■ 26 │ GB │ IE
symbol while doing so. Turn the blender 3
until it audibly engages. The motor cannot start until
on the
SSTME 600 A1