Parkside PRM 1200 B2 Traduction Des Instructions D'origine page 20

GB IE
General Description
Scope of Delivery
Carefully remove the equipment from the
packaging and check whether the follow-
ing parts are complete:
- Lawnmower and curved handle with
connection cable
2 lower bars
-
- Lawn box (in three parts)
- 2 screws to attach the bar
- 2 wing nuts and screws for attaching
the curved handle
- 2 holders to attach the
connection cable
- Instruction Manual
Overview
1 Curved handle
A
2 Wing nuts
3 Lower bar
4 Grass box
5 Wheels
6 Lawnmower housing
7 Collision guard
8 Cable holder
9 Power plug, curved handle
10 Release button
11 Cable strain relief
12 Start lever
13 Screws for lower bar
B
14 Screws for curved handle
C
15 Handle
D
16 upper part of grass box
17 Blade screw
I
18 Blade
19 Motor spindle
20
20 Level gauge
D
21 Wheel axle
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass box. Addition-
ally, the equipment is height adjustable to
three levels and has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical
Specifi cations
Electric Lawnmower .. PRM 1200 B2
Motor input power .....................1200 W
Mains voltage ........ 220 V-240 V~, 50 Hz
Idling speed ........................... 3500min
Blade width ................................. 32 cm
Cut height ................... 20 / 40 / 60 mm
Protection class ................................
Protection type ............................... IP 24
Weight ........................... approx. 9.2 kg
Lawn box volume ............................. 30 l
Sound pressure specifi cation
(L ) ........................ 86 dB(A); K
pA
Noise level specifi cation
measured ....... 90.6 dB(A); K
guaranteed .............................. 93 dB(A)
Vibration on the handle
(a ) ...................... 4.0 m/s
h
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
-1
II
= 3 dB
pA
(L )
WA
= 2.08 dB
WA
; K= 2.0 m/s
2 2