LIVARNO LUX 326714 1904 Instructions De Montage, D'utilisation Et Consignes De Sécurité page 21

Installation
Secure the mounting plate
screws or adhesive pads
6
respectively.
Place the eyes on the bottom part of the LED light
ing plate and latch in the LED light, sliding it sideways as illustrated
in Figure E.
Before use
The batteries
5
Pull the two insulating strips out of the two battery compartments to
activate.
Start-up
For both model HG04436A and HG04436B, the swivel spotlights
can be tilted approx. 45° in any direction (see Fig. A or B).
Switching swivel spots on / off
The LED light
1
has three settings:
Press on / off switch once: high light output.
Press on / off switch again: low light output.
Press the on / off switch again: turns the light off.
7
are factory installed.
is controlled using the On / Off switch
to a level wooden surface using the
included. Refer to figures C or D,
8
onto the mount-
1
2
. This button
3
GB/IE 21