Publicité
Les langues disponibles
Les langues disponibles
Problem
• W ater coming out between the nozzles after cleaning is for cleaning the nozzles and
Water comes out
after stopping bidet
• S ometimes, the nozzles may drop water into the toilet. The water drops form at
operation.
There is a dull sound
from the main body
• This is a sound of resetting the nozzle position and is not a product failure.
after plugging in the
power cord.
Buttons do not
• T he seat sensor lock mode is enabled by default, and the buttons do not work unless
function when
pressed.
The product
• T he heater operates to heat the water quickly when the user takes the seat,
generates a low
humming sound.
• C heck if all of the AAA batteries are put in properly.
• C heck if the batteries are discharged or if there is damage on the +/- terminal.
The remote
• I f the battery level is low or the battery is damaged, replace it with a new one.
controller does not
• C heck if the product is successfully paired with the remote controller for
operate.
• C heck if the main body is powered on. If the main body's power is off, the remote
N OTE
The power-saving ECO GREEN system uses the hybrid instantaneous warm water technology to set the proper
warm water temperature for the seated user and save the electricity costs.
When the ECO GREEN system is disabled, the system maintains the same temperature of the warm water tank
in the same way as the existing hot water storage type, and you can use the product with the power saving
function disabled.
Check
is not a malfunction.
the bottom of the product after cleaning the nozzles or the toilet may drop water
afterward. This is not a malfunction.
the seat is occupied.
generating some noises.
communication. (See P.15.)
controller does not operate.
Possible Solutions
43
Publicité
