For Child Mode cleansing
Child mode
Sit down and press 'Rear' and 'Front' button at the same
time for 2 seconds. There will be a beep sound and the child
function will be activated.
- Y ou can adjust the water pressure, water temperature, warm air
and nozzle position according to the child's preference.
[Water pressure : Level 1 (Soft spray), Warm water temperature
: Level 2 (Warm water), Nozzle position : Level 5 (Maximum),
WIDE Level 1 (Wide and soft spray)
- C leansing water will be sprayed for 1 minute then will switch
automatically to the dry function.
[Drying temperature : Level 2 (Warm air)]
- T he nozzle retracts after cleansing and will be automatically
cleaned for approximately 6 seconds.
* Pressthe
toadjustthepositionofthenozzle.
* Y oucanadjustthewarmwatertemperature,waterpressureandnozzle
positionaccordingtoyourpreference.
* P resspress'Rear'and'Front'buttonatthesametimefor2seconds
whileinoperationforanadditionalminuteofcleansing.
Dry
Automatically activated when cleansing is completed.
- W arm air is emitted for 2 minutes to dry the wet areas.
* W ipethewetarealightlybeforeusingdryfeaturetospeedupdrying.
* P ressthe
toadjustairtemperature.
Stop
Press this button to stop all currently operating functions.
- All current operating functions stop.
* T hedryfunctionstops2secondsaftertheStopbuttonisbeing
pressed.
27