Coway BIDETMEGA 400 Mode D'emploi page 19

Water Path & Nozzle & Toilet Cleaning
Water Path & Nozzle & Toilet Cleaning function
What is the water path & nozzle & toilet cleaning
function?
With the three-stage cleaning care system of the water path
→ nozzle → toilet, you can keep the inside and outside of
the bidet hygienic so that you can use the product with a
peace of mind.
To use the water path & nozzle & toilet cleaning function,
press the 'Clean Bidet' button.
The entire cycle of water path cleaning → nozzle cleaning
→ toilet cleaning is 35 seconds.
(It is recommended to use the function twice or less per day.)
*  D ependingonthequalityofthesuppliedwater,theelectrolyzedwater
usedforcleaningmaynotbegenerated
(e.g.,whenyouuseundergroundwaterforwatersupply).
N OTE
Cleaning principle :  B y decomposing tap water with
electricity without using any additives,
electrolyzed water is generated.
Water path cleaning
This method cleanses every path of water inside the bidet
so that the user can hygienically use the product without
worrying about internal contamination of the bidet.
Nozzle cleaning
In this method, the electrolyzed water is sprayed on the
nozzle, which is easily exposed to contamination, for
cleaning the nozzle. The nozzle is cleaned not only while
the two-stage cleaning function operates but also while
the nozzle returns to its position after the user uses the
front/rear function.
19