Coway BIDETMEGA 400 Mode D'emploi page 13

How to set special modes
Press and hold the 'Power' button and 'Rear' button at
the same time for about 2 seconds on the control panel.
All the LEDs on the control panel turn off and the
equipment enters the Special mode.
*  I f no button is pressed for more than about 10 seconds, the special
mode is disabled.
1
Sound mode
After entering the special mode, press the 'Power'
button the control panel to select a sound mode.
- When the mode is enabled : The LED turns on.
- When the mode is disabled : The LED turns off.
2
Sitting detection mode
After entering the special mode, press the 'Rear'
button the control panel to select a sitting
detection mode.
- When the mode is enabled : The LED turns on.
- When the mode is disabled : The LED turns off.
3
Automatic drainage mode
After entering the special mode, press the 'Nozzle
Clean' button the control panel to select a
automatic drainage mode.
- When the mode is enabled : The LED turns on.
- When the mode is disabled : The LED turns off.
13