Coway BIDETMEGA 400 Mode D'emploi page 24

02 HOW TO USE
Choose the desired cleansing
Basic operation guide for cleansing
✽ Press the 'Move Nozzle'
✽ Press the 'Rear' button again during operation to run additional cleansing.
✽ D uring use, it is possible to adjust the warm water temperature, water pressure, and nozzle position
according to body type and preference.
✽ W hen the nozzle returns to the position after cleansing, it is cleaned automatically for about
6 seconds.
24
[Soothing Wash mode]
This is a sensitive cleansing mode used when the
conditions of the anal area is not capable of normal
conditions and require soft and delicate cleansing.
While sitting on the seat, press the 'Mode' button on the
remote controller to switch to the Soothing wash mode.
When the mode is changed, the Soothing wash LED is lit.
After selecting the desired mode, press the 'Rear' button
to start cleaning.
*  Y oucanchangemodesevenifthecleansingprocesshasalreadystarted.
-  B efore the water is sprayed, the cleaning nozzle is drained
of cold water so that rinsing is done at the set water temperature.
-  T he rinsing water will automatically stop after spraying for
about 1 minute.
-  T he programmed course has been optimized and
designed for poor anal conditions.
button to adjust its position.