Coway BIDETMEGA 400 Mode D'emploi page 31

Remove existing toilet seat
2
1
Install product
N OTE
As the bidet should be installed on the toilet, ensure that water is not splashed onto the bidet.
1
Water pipe
Bidet hose
1
R emove the existing toilet seat ❶ and
seat cover ❷ by removing the fixing nuts.
1
Turn off the main water supply valve ❶ and
separate the existing water tank hose ❷.
2
2-1
Connect the rubber packing, 3/8" T-shaped
connector and water tank hose in this order
Water tank
hose
to the existing water pipe which size is 3/8".
Please connect the bidet hose to the
T-shaped T-shaped connector.
connector
*   P leaseensurethattherubberpackingisinsertedbetween
thewaterpipeandtheT-shapedconnector.
*   F irmlytightenthenutsbelowandontopoftheT-shaped
connectorallthewaytotheendinaclockwisedirection.
N OTE
 K eep the removed toilet seat in a shaded location to
prevent it from being damaged.
31