Publicité
Les langues disponibles
Les langues disponibles
02 HOW TO USE
Buttons and display panel (Bidetmega 400)
Remote Controller - button
Seat Temp. button
7
Use it to set the seat temperature. Pressing this
button, you can switch the temperature level
in the order of Low (green) → Medium (yellow)
→ High (red) → Off.
Clean Bidet button
9
Use it to run the manual Clean function.
Pressing this button, you can switch the
Clean method in the order of Flow Channel
Clean → Nozzle Clean → Toilet Clean.
* M anual Clean : Recommended to run twice a day.
* T hree-stage auto Clean can operate only if no
human body is detected by the seat sensor.
* I f you press the button while sitting on
the seat, the buzzer sounds and Clean is
scheduled. (When the user leaves the seat,
Clean is performed.) If you press it one more
time afterward, the buzzer sounds and the
Clean schedule is canceled.
11
18
Nozzle Position button
6
While using cleansing or women's cleansing, use this button to adjust
the nozzle position back and forth.
Child Mode
This function is specifically designed for children whose skin is more sensitive than adults.
Press 'Rear' and 'Front' button at the same time for 2 seconds and cleansing will occur for
1 minute and drying for 2 minutes.
The nozzle will position according to the size of the user and low water pressure will be used.
* T he child function operates regardless of the seat sensor detecting a human body.
Water/Dry Temp. button
8
Use it to set the water/air temperature.
Pressing this button, you can switch the
temperature level in the order of Low (green)
→ Medium (yellow) → High (red) → Off.
* T his is used as the warm water temperature
indicator while the cleansing/bidet function
is operating and as the drying wind
temperature indicator while the drying
function is operating.
Dry button
10
Use it to select the drying function. It
dries the skin after using the cleansing/
women's cleansing function.
Publicité
