Coway BIDETMEGA 400 Mode D'emploi page 34

03 MAINTENANCE
Installation
Install remote controller
34
1
Before attaching the bracket, thoroughly wipe
the attachment areas with a dry cloth.
*   I fthereiswaterleftonit,itsadhesionpowermaybedegraded.
2
Depending on the wall type, you can install using
the supplied screws and anchor mounts or use
the provided double stick tape on the back of the
remote wall mount.
Make sure the remote mount is fully secured with
either method so that it does not fall and damage
the remote control.
N OTE
-  I f the anchor bolts are not mounted, remote
controller and bracket may fall from the wall.
-  A ny caused damage by not using bolts corresponds
to users' responsibility, not product defect.
3
Attach the bracket onto the wall and press
the middle area with hands for more than 10
seconds.
*   T omaintainadhesionbetweenthedouble-sidedtapeandthe
sealantforalongtime,itisrecommendednottomounttheremote 
controllerinthebracketforonedayafterattachingitonthewall.
N OTE
 I f the anchors are not mounted, remote controller
bracket may fall from the wall.