O perate the product only with supplied mains adapter. Please
note that any damage caused through the use of a different adapter
is excluded from the warranty.
N ever touch the mains adapter
Unplug the mains adapter
be used for an extended period (e.g. whilst on holiday).
T he LEDs become hot during operation. Allow the product and
LEDs to cool before you touch them.
P lease note that the mains adapter
amount of power even if the product is turned off as long as the
mains adapter
product off completely, unplug the mains adapter
socket.
T he LEDs cannot be replaced.
If the LEDs fail at the end of their life, the entire product must be
replaced.
Bringing into use
Q
Note: Remove all packaging materials from the product.
N ever direct the LED light beam on to reflective surfaces or at
people or animals. Failure to observe this advice may result in eye
injury and / or loss of sight to people or animals. Even a weak LED
light beam can cause eye damage.
P lace the product on a flat surface with its back side facing you.
I nsert the connection plug of the mains adapter
nection socket
P lug the mains adapter
24 GB/IE
from the socket if the product will not
9
is plugged into a power outlet. To switch the
9
on the back of the product.
7
into a properly installed socket.
9
with moist or wet hands.
9
continues to draw a small
9
9
from the
9
into the con-