Tronic QI TCPQ A1 Instructions D'utilisation Et Consignes De Sécurité page 37

2. Plug the USB adapter (not included) into an
easily accessible mains socket.
3. LED indicator 1
for approx. two seconds when the product is
under standby mode and there no mobile device
on the Qi charging surface1
4. Place the mobile device on the Qi charging
surface 1
of the device is aligned over the center of the
Qi charging surface. Charging will begin on
contact. The LED indicator 1
when charging is active on Qi charging surface
1 1 . The LED indicator 2
38 GB/IE
and 2
2
or 2 . Make sure the center
1 4
will light up blue
3
1 or 2 4
2 lights up blue
3 lights up blue
.