SilverCrest SESR 6 A1 Mode D'emploi page 15

˜ Before use
˜ Unpacking the product
1 . Take the product out of the packaging and
remove all packaging materials and plastic
wrappings .
2 . Check whether the product and all parts
are in good condition, if any damage or
defect is detected, do not use the product .
˜ Inserting/replacing batteries
(Fig . B)
INFO: Always switch off the product
before inserting/replacing batteries .
1 . Open the battery compartment
the battery compartment cover
anticlockwise direction . I on the battery
compartment cover has to be aligned with
on the main unit
2 . Remove the battery compartment cover
from the main unit
3 . Remove discharged batteries
battery compartment
: Turn
[ 3 ]
in
4 ] [
.
1 ] [
.
1 ] [
from the
[ 5 ]
if applicable .
[ 3 ]
4 . Insert 4 batteries
compartment
polarity (+ and –) .
5 . Close the battery compartment
Put the battery compartment cover
–
onto the main unit
Turn the battery compartment cover
–
clockwise direction until it locks in place .
I on the battery compartment cover
has to be aligned with
unit .
[ 1 ]
˜ Operation
˜ Changing attachments
(Fig . C)
INFO:
Always switch off the product before
o
changing the attachment
Select the attachment
o
[ 4 ]
care . Improper use may result in injuries or
damage to the sneaker .
into the battery
5 ] [
according to the correct
3 ] [
:
[ 3 ]
.
[ 1 ]
on the main
/ /
6 ] [ 7 ] [ [ 8 ]
/ / with
6 ] [ 7 ] [ [ 8 ]
GB/IE/NI
4 ] [
in
4 ] [
.
13