MSW Motor Technics MSW-TW-ET20000 Manuel D'utilisation page 35

5. End of exhaust
6. Combustion chamber
7. Warm air outlet
8. Air circulation chamber
The ignition electrodes are located in the burner head:
To get to them, you need to disassemble, among others, the air inlet grill. Clean
the electrodes with, e.g., benzine using a fine brush. Before reassembly, check
and, if necessary, set a proper distance between them (see technical data
table).
DISPOSAL OF WASTE APPLIANCES
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
TROUBLESHOOTING
Problem
EN
Possible cause Action