ProMinent DULCOLEVEL Mode D'emploi page 3

Safety
Foreseeable Misapplication
Only use the sensor in accordance with its intended use.
Application-specifi c hazards may occur if used improperly.
General Safety instructions
The sensor corresponds to the state of the art in com-
pliance with the usual regulations and guidelines. It may
only be operated in a technically perfect and operational-
ly safe condition.
When used with a pump, additionally observe the safety
instructions in the original operating instructions of the
pump.
For use in a plant:
If the radar sensor is integrated in a plant where a rest-
oration of the power supply after failure or a disturbance
of the power supply may lead to dangerous situations, a
device shall be provided in the plant to prevent this.
Modifi cations to the Device
Unauthorized conversions or modifi cations are expressly
prohibited and can lead to inforeseeable dangers.

For safety reasons, only the accessories specifi ed by
the manufacturer may be used.

If modifi cations are necessary, contact ProMinent
service, see "Troubleshooting" on page Seite 16.
Repairing
The sensor must not be opened.

Follow the instructions in the troubleshooting chapter.

If repair is necessary, contact ProMinent service.
Notes on Radar Frequencies
Observe the national and regional regulations for the use
of radar frequencies.
The sensor is certifi ed according to FCC/IC. Further
information can be found on the nameplate, see page
Seite 7.
Disposal
This device is marked in accordance with the
European Directive 2012/19/EU on waste
electronic and electronic equipment (WEEE).
The directive provides the framework for valid
take-back and recycling of waste equipment.
The sensor is made of recyclable materials. Therefore,
take it to a specialized recycling company for disposal.
Observe the applicable national and regional regulations.
3 EN