Publicité
Les langues disponibles
Les langues disponibles
1.2
Packaging
The individual packages are packed according to the expected transport conditions.
Only environment-friendly materials were used. The packaging is designed to protect
the individual components up to assembly against shipping damage, corrosion and other
damage. Do not destroy them and only remove it just before assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Packaging materials are valuable raw materials and can, in many cases,
be used again or be usefully processed and recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
Symbols on the packaging
Symbol
Name
Keep this product
1.3
Transportation
The unit is supplied in cardboard packaging. Please refer to the technical data for the
packaging dimensions and packaging weight.
Improper transportation
NOTICE!
Material damage due to improper transport
Transport units can fall or tip over if improperly transported. This can cause
considerable damage.
– Observe symbols and instructions on the packaging
– Unload and transport the transport items carefully
– Only use intended attachment points
– Transport items to the place of use using a suitable means of transport or
lifting equipment.
– Use only approved means of transport
– Do not remove packaging until immediately before installation
Description
The arrows indicate the top side of the package.
Top
They must always point upwards, otherwise the contents may be
damaged.
Protect packages from moisture and keep dry.
dry
Cold
Protect packages from the cold (frost).
The package may be stacked with other similar packages until the
Stacking
specified maximum number is reached. Pay attention to the exact
stacking number.
5
General
MAN049701 Ver. 02-03.2024
Publicité
