Publicité
Les langues disponibles
Les langues disponibles
Attach the Steering Wheel
Please follow the steps 1-4 to add the batteries (Not Included), and refer to
the battery information.
1.Use a screwdriver to loosen the
screw
on the battery cover located in the
center of the steering wheel.
2.Remove the battery cover from the
top of the battery compartment.
3. Insert 2x1.5 AA batteries in their
correct polarities.
4. Place the battery cover over the
battery compartment and fasten with
the screw you loosened in step one.
Attach the Steering Wheel
Remove the M5x30 machine screw and Ø5 lock nut from the steering wheel.
Turn the vehicle body upright.
5.Place the steering wheel over the the steering column, protruding from the
middle of the steering wheel base.
6.Align the holes on each side of steering wheel with the holes at the end of
the steering column. Insert the Ø5 lock nut into the the slot on the steering
wheel.
7.Use a screwdriver to tighten the M5x30 machine screw on the opposite side.
6
7
16
3
4
2
1
5
End of steering column
Attach the Side Windows & Side Mirrors
2
5
1. Push the door lock on the inside of the door and open the door.
2. Plug the connector on the side window into the connector on the door, and
hide the connectors into the door.
3-4. Fit the side window to the door. Use a screwdriver to tighten three Ø4x12
screws. Fit the side window on the other side in the same way.
5. Wash and dry your hands, wipe the surface of the product with a clean
dishcloth, tear off the bottom of the stickers, and attach the stickers to the
product as shown.
6. Plug the connector on the mirror into the connector on the side window.
Then hide the connectors into the side window.
7. Fit the side mirror to the side window and push hard so that it snaps into the
place. Repeat for the other side mirror.
6
3
4
4
4
1
Door Inside View
7
Side View
Door
lock
17
Publicité
