Costway TQ10228 Mode D'emploi page 10

Attach the Windshield
1 1
1. Fit the windshield to the vehicle body. Push until you hear it "clicks" into
place.
2-3. Fit the seat back to the vehicle body, tighten two Ø4x12 screws with a
screwdriver to secure the seat back to the body.
Tabs on seat back
18
Connect the Power Supply & Attach the Seat
1.Plug the red vehicle connector into the red connector on the battery.
2.Plug the white motor connector on each side into the white connectors on
the vehicle body.
3.Fit the tabs on the seat into the grooves on the seat back.
4.Use a screwdriver to tighten the both M5x16 screws at the top of the seat
into the holes in the vehicle.
Front View
Red to red
4
2
x2
3
White to white
1
19