Stiebel Eltron SBB 300-1 Plus Utilisation Et Installation page 19

INSTALLATION
Preparation
SBB 400-1 Plus
SBB 500-1 Plus
1
2
1 Washer
2 Adjustable foot
3 Lifting strap
f Connect 2 of the supplied adjustable feet with the supplied
washers and lifting straps, as shown.
f Wind in the two adjustable feet with lifting straps as far as
possible.
f Wind in the adjustable foot without a lifting strap to a similar
depth as the two adjustable feet with lifting straps.
Note
The lifting straps can remain on the appliance once it
has been sited.
www.stiebel-eltron.com
Top of the appliance
3
f Wind a suitable fitting into the DHW outlet.
f Insert a sufficiently strong pipe or an appropriate rod
through the fitting. Take into account the door widths and
any narrow areas on the way to the installation site.
8.2.2 Siting
f Use the adjustable feet to compensate for any unevenness in
the floor.
SBB 300-1 Plus, SBB 400-1 Plus, SBB 500-1 Plus | 19