OPERATION
Safety
1.2
Other symbols in this documentation
Note
General information is identified by the adjacent symbol.
f Read these texts carefully.
Symbol
Meaning
Material losses
(appliance damage, consequential losses and environmen-
tal pollution)
Appliance disposal
f This symbol indicates that you have to do something. The ac-
tion you need to take is described step by step.
1.3
Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
2.
Safety
2.1
Intended use
The appliance is intended for domestic use. It can be used safely
by untrained persons. The appliance can also be used in non-do-
mestic environments, e.g. in small businesses, as long as it is
used in the same way.
This appliance is designed to heat DHW with heat pumps.
Any other use beyond that described shall be deemed inappro-
priate. Observation of these instructions and of the instructions
for any accessories used is also part of the correct use of this
appliance.
16
| SBB 300-1 Plus, SBB 400-1 Plus, SBB 500-1 Plus
2.2
General safety instructions
WARNING Burns
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
The appliance may be used by children aged 8 and up and
persons with reduced physical, sensory or mental capa-
bilities or a lack of experience and expertise, provided
that they are supervised or they have been instructed
on how to use the appliance safely and have understood
the potential risks. Children must never play with the
appliance. Cleaning and user maintenance must not be
carried out by children without supervision.
Material losses
!
The appliance is pressurised.
During the heat-up process, expansion water will drip
from the safety valve. If water continues to drip when
heating is completed, please inform your qualified con-
tractor.
2.3
Test symbols
See type plate on the appliance.
3.
Appliance description
The DHW is heated via a smooth tube internal indirect coil. In
addition, a threaded immersion heater can be connected. You can
use the appliance to supply one or more draw-off points.
The appliance is equipped with an inspection flange and ther-
mometer.
The steel cylinder is coated on the inside with special directly
®
applied "anticor
" enamel and equipped with a protective anode.
This anode protects the inside of the cylinder from corrosion. The
cylinder is encased by foam insulation and a plastic jacket.
www.stiebel-eltron.com