Marklin Digital 60667 Mode D'emploi page 18

Web-Interface
When the Mobile Station WLAN is not connected to
a router or the 60117 WLAN Box, you can access the
Mobile Station from a PC (with WLAN) or a Smartphone.
Address: 192.168.1.1
or: msw.local
Several settings can be done on the device in the user
interface shown in the browser. Among other things, a
previously downloaded update for the Mobile Station
WLAN can also be recorded here.
Even if the WLAN mobile station is connected to a
router or a WLAN receiver box 60117, the web inter-
face can be accessed. To do this, the current address
must first be read in the WLAN settings of the WLAN
mobile station under „Display WLAN". The device
used to access the web interface must be on the same
network as the WLAN mobile station.
Update
An update (firmware update) can be loaded using the
Web interface as explained previously. Requirements
for this update are:
• The battery status of the Mobile Station WLAN must
be greater than 50%.
• The file for the update must be connected to the
Mobile Station WLAN (PC, Smartphone, ...) and
ready to go.
Select the menu using the settings in the Web inter-
face. The update can be loaded there.
If the update does not perform successfully, an error
code will be given from the Mobile Station WLAN
with a reference to the cause of the problem. The list
with the error codes is displayed in the Web interface
under „Info".
Error Codes
1 Battery voltage too low
2 Update image too large
3 Version already installed
4 Update too old
257, 258 Bootloader error
1025 – 1032 Error during storage
4097 – 4107 Update image defect
4108 Update image invalid
18
Simplified Conformity
Declaration
Gebr. Märklin & Cie GmbH hereby declares that the
radio installation, item number 60667, adheres to
directive 2014/53/EU. The complete text of the EU
conformity declaration is available at the following
Internet address under „Downloads":
https://www.maerklin.de/produkte/60667