Publicité
Les langues disponibles
Les langues disponibles
Keyboard
scroll
backward
Switch
active
loco
Stop
Solenoid Items
Solenoid items can be switched in the Keyboard.
Solenoid items do not need to be set up. They can be
switched immediately using the address.
Turning Protocols On/Off
The protocols for switching solenoid items are inde-
pendent of the protocols for running a locomotive.
Switching Solenoid Items
320 addresses (MM or DCC) are displayed with stan-
dard symbols for solenoid items.
When the Mobile Station is connected to a Central
Station, the solenoid items are displayed with the sym-
bols used there (exceptions: turntable and color light
signals. Color light signals are shown as semaphore
signals, the turntable with the standard symbols for
solenoid items).
The last locomotive called up will continue to be
displayed on the lower edge of the display. You can
Keyboard
no.
SHIFT
Shift
reversing direction
Shift + control knop = fast Keyboard selection
SHIFT
+
STOP
STOP
loco control knob
continue to control it. You must change to the locomo-
tive mode again in order to change the locomotive or
to call up other locomotive functions.
Changing to the Keyboard:
Browsing:
Switching:
Tip:
When you press the button
down, you can browse faster through the Keyboard.
address
loco control mode
SHIFT
Keyboard
scroll
forward
Switch
and hold it pressed
17
Publicité
