Publicité
Les langues disponibles
Les langues disponibles
Introduction
The following pictograms are used in these operating instructions / on the device:
Refer to operating manual!
Follow warnings and safety notices!
Never use hydrogen, oxygen, carbon
dioxide or other bottled gasses as an
power source
Wear ear protection, dust mask, safety
glasses and protective gloves.
Pneumatic impact wrench
PDSS 310 A3
Introduction
Congratulations! You have chosen a high-
quality device from our company. Famili-
arise yourself with the product before
using it for the first time. In addition, please carefully
refer to the operating instructions and the safety
advice below. Initial operation of this tool must be
performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!
Intended use
This air powered impact driver is suitable for loose-
ning and tightening screw connection during as-
sembly and repairs, and for loosening bolts when
changing tyres. Only use the product as described
and for the specified applications. Keep these in-
structions in a safe place. When passing this product
on to others please also include all documents. Any
use not specified is prohibited and potentially dan-
gerous. Damages resulting from noncompliance or
misuse are not covered by the warranty and are
not included in the manufacturer's liability. This de-
vice has been designed for household use and may
not be used for commercial or industrial purposes.
48 GB
275671_par_Druckluft-Schlagschrauber PDSS_content_AT_CH.indd 48
Compressed air hose
Note
Features
Verify contents are complete and the de-
vice is in perfect condition immediately
after unpacking. Do not use if the tool is
defective.
Adjustable screw
1
Compressed air connection (for ¼" plug nipple)
2
Torque control
3
Trigger
4
Oil filling port
5
Pivot bolt (forward / reverse)
6
Square drive
7
The following parts are considered
accessories:
Extension
8
Plug nipple (¼" = 6.35 mm)
9
Machine oil
10
Lubricator
11
Allen key
12
Socket attachments
13
Technical Data
Air consumption:
Operating pressure:
Square drive:
Compressed air connection: ¼" (6.35 mm)
Tool intake:
Max. torque:
approx. 350 l / min
max. 6.3 bar
½" (12.7 mm)
½" (12.7 mm)
310 Nm
09.05.16 14:13
Publicité
