WC2743SSBC
① Display Window
Display the measured temperature inside the wine cooler;
Each time, the temperature inside will drop 1 ℃, until reduced to a minimum, and then a return to the highest
② Cycle Button (Temperature control / Fahrenheit Celsius conversion)
temperature.
Press for 3 seconds, the window to achieve Celsius / Fahrenheit display conversion
③ Cycle Button (Power switch / light switch conversion)
In standby mode: press and hold for 3 seconds, power is turned on, the machine starts
In the boot state: short press this button, LED lights on / off switch.
(If there is a door light switch, the light will be on only when the light is turned off and the door is opened, and the light
will be off when the door is closed. If you want the light to stay on, just turn it on. The door lamp switch will not be
controlled.)
(If it is a lamp with multiple colors, change one color each time you press it.)
In the boot state: press the button for 3 seconds, the power is off, the whole machine is closed.
Press ②③ button at the same time for 3 seconds,the window ① will show "cycle
will entry WI-FI seaching function.The "
Press and hold ②③ button for 1 second to check the current WI-FI connection status.
If the symbol turns quickly ,it means it is connecting now, the symbol turns slowly,it means the WI-FI connection is
dropped, and the symbol does not turn,it means WI-FI connection is online.
ADJUSTABLE WOODEN SHELVES
Shelf installation and taking instruction:
Sliding wooden shelf installation and taking instruction:
Shelf taking: According to below instruction drawing to pull out the shelf to support bracket ① , press two sides of sliding
roller buckles and pull out the shelf following the arrow mark ② .
Shelf installation: According to below instruction drawing to push in the shelf alignment with two sides of sliding roller
following the arrow mark ③ .
WC2743SSBC
DISPLAY PANEL OPERATING INSTRUCTION
" symbol will disappear when the WI-FI connection is successful.
ADJUSTABLE WOODEN SHELVES
" symbol,it means the product