Crivit 337414 2001 Notice D'utilisation page 5

Congratulations!
You have chosen to purchase a high-quality prod-
uct. Familiarise yourself with the product before
using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand over
all accompanying documents.
Package contents (Fig. A)
1 x stand (1)
1 x lower bar (2a)
1 x upper bar (2b)
1 x pear-shaped punch bag (3)
2 x boxing glove (4)
1 x coupler (5)
1 x screw (6)
1 x bar base (7)
1 x air pump (8)
2 x washer, large (9)
1 x washer, small (10)
1 x open end spanner (11)
1 x lock washer (12)
1 x instructions for use
Technical data
Permissible operating pressure: max. 2 bar
Date of manufacture (month/year):
07/2020
Intended use
This product is intended as a toy for children from
6 years of age and is for indoor use only.
Safety Information
• This product may not be used by children under
6 years of age.
• Warning. This toy does not provide protection.
• Warning. The packaging and mounting materials
are not a constituent part of the toy and they must
be removed in all cases for safety reasons before
the product is given to children to play with.
• Warning. Use only under adult supervision.
• Before using it for the first time: Read the user
information together with your child.
• The product should only ever be used by one
person at a time.
• There must be a clear space of approx. 1.5m
on all sides around the area in use (Fig. E).
• Use the product on a flat, level and non-slip
surface only.
• Do not use the product near stairs or steps.
• To prevent injuries due to incorrect handling, the
product may only be assembled by an adult.
Make sure to use the product only after it has
been completely assembled.
• Only adults may inflate the product.
• Only air may be used to fill the punch bag.
• Do not blow up the punch bag with your mouth
because this can lead to dizziness.
• Only use the air pump supplied to inflate the
product.
• Only use the product if it is in perfect condition.
Check the product for damage and wear and
tear before each use.
• Check the product regularly for damage or
deterioration.
Do not use the product anymore if it is dam-
aged.
• Make sure that the spring is always covered by
the spring cover during use. There is a risk of
crushing.
• Do not use the product if you are injured or
your health is impaired.
Assembly
1. Screw the pump needle onto the pump and
dampen it.
2. Inflate the pear-shaped punch bag (3) (Fig. B).
Note: Insert the pump needle into the punch bag
completely.
3. Assemble the product according to Figure C.
4. Set the desired height, by turning the screw on
the coupler (5) and either pulling the upper bar
(2b) out or pushing it in.
Note: Observe the minimum insertion depth
of the upper bar (2b), do not exceed the mark
indicated.
GB/IE 7