UNITED OFFICE UAVS 450 A1 Mode D'emploi Et Consignes De Sécurité page 13

Cleaning
DANGER!
► Always pull out the plug
electric shock!
WARNING!
► The appliance becomes hot during use. Allow the appliance to cool down
completely before cleaning it.
► Do not touch the cutting blades of the appliance with your fingers.
The cutting blades are very sharp!
CAUTION!
Do not spray any oil or other lubricants into the cutter opening
can irreparably damage the appliance.
► To avoid irreparable damage to the appliance, ensure that no moisture gets
into it during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
♦ Remove any residue left in the cutter opening
able object (e.g. brush or tweezers). Ensure that the appliance is unplugged
before doing this.
♦ Clean the surfaces of the appliance with a soft, dry cloth.
♦ Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues from the appliance surface.
♦ Remove dust deposits on the grille of the ventilation system
brush, soft brush or a vacuum cleaner.
Storage when not in use
♦ If you decide not to use the appliance for a long period, disconnect it from
the mains power supply and store it in a clean, dry place away from direct
sunlight.
Troubleshooting
If there is a jam in the appliance
This means that you may have attempted to feed too much paper into the appli-
ance (max. 10 sheets 80 g/m
♦ Press the REV button
ance now goes into reverse and the material is ejected.
GB │ IE
│
■ 10
5
before cleaning the appliance. There is a risk of
2
paper).
r
if the paper being shredded is jammed. The appli-
4
4
or cutting blades with a suit-
2
with a paint-
UAVS 450 A1
. These