UNITED OFFICE UAVS 450 A1 Mode D'emploi Et Consignes De Sécurité page 12

Overheating protection
This appliance is fitted with overheating protection. If the motor overheats due to
overloading, the appliance switches itself off automatically. The LED
up continuously red until the motor has cooled down sufficiently.
If this occurs, do the following:
Note
► The appliance is equipped with an active ventilation system
switch off the appliance or disconnect it from the power supply while it is still
cooling.
♦ Allow the appliance to cool down for about 10 minutes.
After the motor has cooled down, the appliance is ready for operation again.
Emptying the waste collectors
WARNING!
► Move the On/Off switch
prevent the appliance from switching on accidentally.
Note
► Empty the waste collector
being drawn into the cutting blades from below.
► Dispose of the waste material in an environmentally-responsible manner.
♦ Pull the waste collector
(see Fig. 4). The LED
Fig. 4
♦ Empty the waste collector
♦ Slide the large waste collector
until you hear it click into place (see Fig. 4). The LED
UAVS 450 A1
3
on the rear of the appliance into position
0
regularly to prevent the shredded material from
0 w
by the handle out of the appliance base
t
flashes blue.
0
.
0
all the way back into the appliance base
t
lights
2
. Do not
O
to
7
7
t
lights up blue.
GB │ IE 9
│
■