Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Electrical connection
The fitter must ensure that:
•
The mains power voltage and frequency correspond to what is marked on the identification
plate.
•
The domestic wiring system can withstand the maximum power marked on the
identification plate.
•
After connecting the power supply, check that all electrical parts of the oven are working
correctly.
Oven installation
1.
Position the oven inside the unit and ensure that the feed cable is not trapped or in contact
with parts of the oven that heat up.
2.
Make sure that the body of the oven is not in contact with the walls of the unit and that
there is a minimum space of 2 mm between adjacent units.
3.
Centre the oven in the unit so that there is a minimum space of 5 mm between the oven
and the doors of the furniture that surrounds it.
4.
Open the door and insert the plastic plugs supplied with the oven into their respective
housings.
5.
Fasten the oven to the unit with the screws supplied, screwing them into the unit through
the stops.
EN 14
mín 5
Publicité
