Télécharger Imprimer la page

ETNA OM871ZT Mode D'emploi page 54

Masquer les pouces Voir aussi pour OM871ZT:

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
Pay attention to the order and position of the glass panes when removing them as they
must be reassembled in the same order and position when you have finished cleaning
them.
5.
Clean the glass panes with a glass cleaner or soap and water and a soft cloth.
6.
Insert the glass panes.
▷ The TERMOGLASS indication on pane number 3 must be visible as shown in the figure.
▷ Insert pane no. 2 with the printed part facing toward the iner side of the door.
7.
Re-attach the top seal of the door, making sure that the side tabs fit into their housings
(click).
Attention!
Never switch on the oven if any of the glass panes on the door are missing.
Replacing the oven light bulb
The light bulb is a consumer item and therefore does not fall under the guarantee.
Before replacing the light bulb, disconnect the appliance from electricity by
unplugging it or switching off the fuse in the circuit breaker box!
The light bulb in this household appliance is designed exclusively for lighting this
appliance. The light bulb is not suitable for lighting a household area.
Replacing the light bulb
1.
Turn the cover to remove it.
2.
Replace the defective lamp with a lamp of the same type and reassemble the glass cover.
EN 12

Publicité

loading

Ce manuel est également adapté pour:

Om871rvsOm871rvs/e01Om871zt/e01