Publicité
Les langues disponibles
Les langues disponibles
1.This circular hole is the exhaust hole at
the bottom of the spa, which can prevent
bottom bulging when the spa is filled with
water.
2.Install the filter before using, which can
prevent hairs or other small debris from
entering the chassis, to damage the
circulation function and influence the
service life of spa.
3.Before use, it is necessary to remove
the black protective covers on the inlet
and outlet respectively, otherwise the
water will not heat up.
4.Garden hose adapter, which can
connect your garden hose for
convenient drainage.
If using this adapter to fill water, it is
necessary to open the drain plug at the
bottom of the spa so that water can
enter.
After filling the water, press the water
plug at the bottom tightly.
10
3
SPECIFICATION SHEET
1
Format
Number Of Persons
Water Capacity
Voltage/ Frequency
2
Rated Power
External Dimensions
Height
Filter pump(AC 12V/50Hz)
Air Blower(AC 220-240V/50Hz)
3
Heater(AC 220-240V/50Hz)
Power Cable
Temperature Range
Temperature Rise
Number of Air Jets
4
Weight with full water
(Without Persons)
LSMS001
MODEL
4 PEOPLE
Round
4
600L
AC 110-120 / 60Hz
2400W
ø 71''/180.34cm
25''/63.5 cm
1400l/h
600W
1200W
5.2 m H07RN-F 3*1.00mm² with
a plug fitted with an RCD
68℉-104℉
33.8-34.7℉/Std.
120
1369lbs /621 kg
LSHS001
6 PEOPLE
Round
6
910L
2400W
ø 82''/208.28cm
25''/63.5 cm
1400l/h
600W
1200W
68℉-104℉
33.8-34.7℉/Std.
130
2063.5lbs/ 936 kg
11
Publicité
