Publicité
Les langues disponibles
Les langues disponibles
WARNING
• DO NOT add bath oil or bath salt to the spa water.
• It is highly recommended to use tap water for spa filling to
minimize the influence of unwanted content, such as minerals. DO
NOT use rainwater, surface water, seawater.
• DO NOT operate the spa if water is lower than the minimum
waterline.
• DO NOT allow the water in the spa to freeze. Do not turn on the
spa when the water is frozen.
• Never pour water with a temperature higher than 104°F (40°C) into
the spa directly.
• Always add chemicals to water, never add water to chemicals.
Adding water to chemicals may
cause strong fumes or violent reactions and hazardous chemical
spray. Maintain water chemistry in accordance with manufacturer' s
instructions.
• Do not leave the spa empty for extended period of time. Do not
expose the spa to direct sunlight for extended period of time.
WARNING
This product is designed with a GFCI located at the end of the
power cord. The GFCI must be tested before each use.
a. Plug the power cord into a grounded electrical socket.
b. Press the TEST button on the GFCI. The GFCI indicator should
turn off and the electrical equipment should shut down.
c. Press the RESET button on the GFCI. The indicator turns red
and the spa is ready for use.
DO NOT use the spa if the GFCI does not function properly.
-Disconnect the power cord and contact a qualified electrician to
correct the fault.
DO NOT bypass the GFCI. There are no serviceable parts inside
the GFCI.
DO NOT unplug by pulling the cord. The GFCI plug might be
damaged.
08
2
TECHNICAL DATA
No.
Name
Qty.
A
Owner's Manual
1
B
Ground Cloth
1
C
Storage Bag
1
D
SPA Cover
1
E
Buckle Key
2
F
Control Base
1
G
Inflation Hose
1
No.
Name
Qty.
H
Inflation Outlet Cap
1
I
Filter Cartridge
2
J
Filter Cover
2
K
Joint Hose
3
L
Pump
1
M
Safety Sign Card
1
N
Repair Patch
1
0
Drainage Regulator
1
09
Publicité
