Publicité
Les langues disponibles
Les langues disponibles
SPA tub
Additional air pressure
is out of
due to strong sunlight.
normal
shape.
The one-way valve is
not assembled properly.
Hole, cut or split on spa
The SPA
tub.
loses air
Pressure.
Ambient temperature
drops drastically.
The water stopper at
the bottom of the SPA
is loose.
The SPA
loses
water.
Hole, cut or split on spa
tub.
Weak air
pressure
Wrong position of air
during
pump or inflation hose.
inflation
and
bubbling.
32
Do not expose the spa to direct sunlight
for extended period of time. Check the
air pressure and release air if necessary.
During very hot weather, you must check
to see whether it is necessary to release
some air. This is to avoid any possible
damage to the tub.
Do the leak test on the one-way valve,
refer to Leakage Check.
Perform leak test to locate the leaking
area, refer to Leakage Check. Then
apply use the repair patch provided to
repair, refer to SPA Tub Repair.
It is a normal that the air shrink in low
temperature environment. Fill more air
into the spa, refer to Inflation.
Press water stopper tightly for water
seal.
Perform leak test to locate the leaking
area, refer to Leakage Check. Then
apply use the repair patch provided to
repair, refer to SPA Tub Repair.
Check and replace the seal gasket/o
ring properly.
Leakage or regular issue in the
Inflatable Hot Tub
Leaking Water:
When installing the spa, both the water plug and drainage sealing
cover must be tightened.
Leaking Air:
Both the gray and black parts of the one way valve need to be
tightened.
About Heating:
33
Publicité
