BORETTI BKVD-179 Notice D'emploi page 86

21. Open the appliance upper door⑲. Place the unit upper door⑮ onto the appliance door
inserting adjustment bolts⑫ into the slots on the door hang②. (fig.N)
22. Place the washers⑬ and screw the nuts⑭ onto the adjustment bolts⑫. (fig.N)
23. 1~2 mm gap between the unit itself and unit door is vital for appliance performance.
Close the door and make the accurate adjustment of the unit door⑮ by screwing or
unscrewing the adjustment bolts⑫ for vertical adjustment and by the help of the slots on
the door hang② for other directions. (fig.P1)
24. Place the door bottom fixings⑤ to the bottom of the appliance upper door⑲ between the
appliance upper door⑲ and unit upper door⑮. Screw the door bottom fixings⑤ to the
appliance door with screws⑥. (fig.O)
25. Screw the door bottom fixings⑤ to the unit upper door⑮ by screws⑦. (fig.O)
26. For the adjustment of the space between the unit upper door⑮ and the unit itself, you
can unscrew the screws⑥ then adjust the space between the appliance upper door⑲
and unit upper door⑮ by the spring effect of the door bottom fixings⑤ while screwing
back the screws⑥.
27. Slide the hang cover③ onto the door hang②. (fig.P2)
28. Repeat the same procedure for the lower door.
EN - 82 -