Publicité
Les langues disponibles
Les langues disponibles
3.6.2. Groups of days
This function allows you to programme 4 common time bands of switching the appliance on and off for several days or
for the whole week (see summarising table below).
To set a single time band, proceed as follows:
1) Press IP followed by the button
2) Choose a GROUP of days by pressing the +/-
3) press OK
4) repeat the operations described in points 4-10 of section 3.6.1.
Table summarising the available groups of days
Group "MO-FR"
DAY 1 2 3 4 5
Group "SA-SU"
DAY
Group "MO-SA"
DAY 1 2 3 4 5 6
Group "MO-SU"
DAY 1 2 3 4 5 6 7
3.7 HOURLY PROGRAMMING IN DHW MODE
This function allows you to programme 4 time bands of boiler
operation in DHW mode during the week (the programmed time
bands are the same for every day of the week).
To set the hourly programming in DHW mode, proceed as follows:
1) Press IP followed by the button
(heating and DHW);
2) Select the DWH programme "HW PR" by pressing the +/-
buttons repeatedly;
3) press OK
4) Set the time bands in which to enable DHW operation,
repeating the operations described in points 4-10 of section
3.6.1 (factory value 06:00 - 23:00).
IMPORTANT
: to activate weekly programming the installer must set the parameter "HW PR" = 2, as described in
section 20.1.
Programming in
DHW mode
INSTRUCTIONS FOR USERS
;
;
from Monday to Friday
6 7
Saturday and Sunday
from Monday to Saturday
every day of the week
to access programming
9
FACTORY VALUES
As in the table in section 3.6.1.
07:00 – 23:00
As in the table in section 3.6.1.
As in the table in section 3.6.1.
PROGRAMMED TIME BAND
Days of the week
7864176 - en
Publicité
