Baxi Nuvola 3 Comfort Notice D'emploi Et D'installation page 10

4.1 ECONOMY - COMFORT FUNCTION
The aim of this function is to set two different ambient temperature values:
Economy / Comfort.
For greater simplicity we advise assigning to the ECONOMY temperature a value lower than the COMFORT temperature.
To set the desired ambient temperature, press the button
• the letters "ECONM"indicate that the reduced ambient temperature has been set:
the display shows the symbol
• the letters "COMFR" indicate that the nominal ambient temperature has been set:
the display shows the symbol
To modify the ambient temperature value temporarily, press the buttons +/-
manual or automatic as described below:
AUTOMATIC OPERATION (symbol shown on the display
The set ambient temperature depends on the time band (section 3.6). Within the time band the ambient temperature is the
COMFORT temperature, outside this time band the ambient temperature is the ECONOMY temperature. By pressing the
button it is possible to modify the ambient temperature temporarily (from COMFORT to ECONOMY and vice versa)
until the next change of the set time band.
MANUAL OPERATION (symbol shown on the display
Press and set manual boiler operation.
By pressing the button it is possible to modify the ambient temperature (from COMFORT to ECONOMY and vice
versa) until the next time the button is pressed.
INSTRUCTIONS FOR USERS
4. SPECIAL FUNCTIONS
;
;
)
10
:
or see section 4.3. This function may be
)
7864176 - en