MIRKA PROS Serie Instructions D'utilisation page 234

en | UK
Declaration of conformity
Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the Mirka® products (listed below and see "Technical data" table for particular model) to which
this declaration relates are in conformity with the following standards or other normative documents: BS EN ISO 12100:2010, BS EN ISO
11148-8:2011, BS EN ISO 15744:2008 & BS EN ISO 28927-3:2009.. In accordance with the Supply of Machinery (Safety) Regulations 2008.
®
Products: Mirka PROS 150 mm (6"), 125 mm (5")
Jeppo 12.08.21
Place and date of issue
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
www.mirka.com
This chapter is an addition to the English language chapter of the manual in order to fulfill the UKCA regulation
requirements. Please refer to the English language chapter for more information about your product.
Statement of Compliance
We Mirka Ltd, hereby declare under our sole responsibility that the above-mentioned products, to which this statement
relates, complies with the compliance conditions in Schedule 2 of The Product Security and Telecommunications
Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.
The defined support period for the above-mentioned products is two years after the production date. The production
date can be found on the marking plate of the products month/year.
234
Mirka® PROS 150 mm (6"), 125 mm (5")
Company
Importer Information
Mirka (UK) Ltd
Saxon House
Shirwell Crescent
Furzton Lake
Milton Keynes
MK4 1GA
Tel. +44 (0)1908 866100
Stefan Sjöberg, CEO