Télécharger Imprimer la page

Parkside PWD 12 B1 Traduction Des Instructions D'origine page 30

Masquer les pouces Voir aussi pour PWD 12 B1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
GB
MT
Problem
Weak or no suction power/
throughput
Float does not close suction
opening
Dust or dirt is blown out of
the device
Disposal/
environmental
protection
The device, accessories and packaging
should be properly recycled.
Waste electrical and electronic
equipment (WEEE) must not be
disposed of with domestic waste.
The symbol of the crossed-out wheeled bin
means that this product must not be dis-
posed of as unsorted municipal waste at
the end of its useful life.
30
Possible cause
Suction hose (13) or nozzles
blocked
Suction pipe (12) not cor-
rectly assembled
Dirt container (6) open
Dirt container (6) full
Filter (15/16/17) full or
clogged
Float in filter basket (21) in
incorrect position (e.g. due to
jerky movements)
Float in filter basket (21) de-
fective
Float in filter basket (21) not
moving
Float in filter basket (21) de-
fective
Filter (15/16/17) not as-
sembled or incorrectly as-
sembled
Directive 2012/19/EU on waste
electrical and electronic equip-
ment:
Consumers are legally obliged to recycle
electrical and electronic equipment in
an environmentally sound manner at the
end of its life. In this way, environmentally
friendly and resource-saving recycling is
ensured.
Depending on the implementation in na-
tional law, you may have the following op-
tions:
• Return to a shop,
• Hand over to an official collection
• Return to the manufacturer/distributor.
Error correction
Removing obstructions and
blockages
Attaching and removing the
suction pipe, p. 26
Attaching and removing the
motor head, p. 25
Emptying the dirt container,
p. 29
Empty, clean or replace the
filter
Turn off the device, the float
will sink, then switch it back
on
contact the service centre.
Release float
contact the service centre.
Attaching and removing
the filter and filter bag,
p. 26
point,

Publicité

loading