Publicité
Les langues disponibles
Les langues disponibles
all moving parts have come to
a complete stop
when leaving the device,
•
before changing the ac-
•
cessories,
before removing obstruc-
•
tions or loosening block-
ages,
before checking the device,
•
cleaning it or performing
maintenance work on it.
If the device starts to vibrate
•
abnormally, an immediate
check is required, :
Examine for loose parts and
•
tighten these,
search for signs of damage,
•
replace damaged accessor-
•
ies. For repairs, contact the
service centre.
Cleaning, maintenance
and storage
Allow the motor to cool down
•
before storing the device for a
longer period.
Replace worn or damaged
•
parts in the interests of safety.
Use only original spare parts
and accessories. Using extern-
ally produced parts results in
the immediate loss of any war-
ranty claim.
The device may only be
•
opened by an authorised
electrician. Always contact
our service centre for repairs.
Switch the drive off, discon-
•
nect the device from the
power supply and allow the
device to cool off if you want
to clean, adjust, store the
device or to exchange an ac-
cessory part.
Handle the device with care
•
and keep it clean.
Store the device out of reach
•
of children.
Preparation
WARNING! Risk of injury due to un-
intentional start-up. Do not insert the plug
into the outlet until the device is fully pre-
pared for use.
Attaching and removing the
motor head
Disassembling the motor head
(Fig. A)
1. Unlock the locks (8) on the dirt con-
tainer (6).
2. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
Assembling the motor head
(Fig. A)
1. Position the motor head (1). Pay atten-
tion to the direction.
2. Lock the locks (8) on the dirt container
(6).
Assembly
State on delivery
• Motor head (pre-assembled)
GB
MT
25
Publicité
