Place the motor head (1) with the top
facing downward.
2. Inside the dirt container (6), pull the fil-
ter bag over the suction connector (5).
The sealing ring 22 on the filter bag
opening must fully surround the con-
nector (23) on the suction connector.
3. Mount the motor head.
Removing the filter bag (Fig. D)
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. You can remove the filter bag.
3. Mount the motor head.
Removing the foam filter (Fig. E)
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. Carefully remove the foam filter (15).
3. see Installing the textile filter (Fig. D);
Blowing, p. 28
Installing the foam filter (Fig. E)
Only insert a dry filter.
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. Roll the foam filter (15) up a bit.
3. Pull the foam filter over the filter basket
(21).
4. Roll the foam filter so that it is smooth.
5. Mount the motor head.
6. Wet vacuuming, p. 28
Inserting the nozzles
Floor nozzle (18) with insert at-
tachment (19)
• Wet and dry vacuuming of smooth sur-
faces and carpeted floors
Floor nozzle (18) without insert at-
tachment (19)
NOTICE! Risk of damage! Be aware that
sensitive surfaces may be scratched if
working without the insert attachment.
• Wet and dry vacuuming of carpeted
floors
• Removing stubborn dirt
Removing the insert attachment
1. Push the tabs on the right and left of
the floor nozzle (18) and remove the
insert attachment (19).
Crevice nozzle (20)
• Vacuuming joints, corners and radiators
Attaching and removing nozzles
The nozzles can easily be attached to and
removed from the suction pipe (12) and
the suction hose (13).
Operation
Dry vacuuming
Notes
• Never perform vacuuming without a fil-
ter!
• The paper filter bag is not suitable for
vacuuming fine dust. To vacuum fine
dust, you will need an additional fine
dust filter bag (Spare parts and ac-
cessories, p. 32).
Permitted filters and nozzles
• Filter
• Textile filter (16)
• Filter bag
• Paper filter bag (Recommended)
• without
• Nozzles
• All
GB
MT
27