• Extracting water
The suction of flammable, explosive or
hazardous substances is prohibited.
Any other use that is not expressly permit-
ted in this instruction manual may pose
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
Opening the dirt container: Disassembling
the motor head (Fig. A), p. 25
• Motor head
• Dirt container
• 4 × Castor (in dirt container)
• Suction tube (three-part)
• Suction hose, Handgrip section
• Textile filter (pre-assembled)
• Foam filter(in dirt container)
• Paper filter bag (in dirt container)
• Floor nozzle, Insert attachment
• Crevice nozzle (in dirt container)
• Translation of the original instructions
Overview
The illustrations for the
device can be found on
the front and back fold-out
page.
A Housing
1 Motor head
2 Carrying handle
3 On/Off switch
4 Accessories holder
5 Suction connector
6 Dirt container
7 Foot (with castor and accessories
holder)
8 Lock
9 Blower connector
10 Power cord
11 Cable clip
Accessories
12 Suction tube (three-part)
13 Suction hose
14 Handgrip section
Filter
15 Foam filter
16 Textile filter
17 Paper filter bag
Nozzles
18 Floor nozzle
19 Insert attachment
20 Crevice nozzle
D
21 Filter basket
22 Sealing ring
23 Connector
F
24 Holder (Power cord)
Description of functions
The device is fitted with a stainless steel
dirt container. The rollers provide good
manoeuvrability of the device. In case of
wet suction, the suction airflow is switched
GB
MT
21