Güde GMK 355-2.3 Traduction Du Mode D'emploi D'origine page 23

Technical Data
Metal Cutting Chop Saw
Art. No
Service connection
Rated input
No-load speed
Saw blade dia. x hole dia
Cutting performance Rectangle 45° / 90°
Cutting performance Square 45° / 90°
Cutting performance Round material 45° / 90°
Min. workpiece dimensions
Weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Measured according to
Wear ear protectors!
"Emission values and not necessarily safe work levels are concerned in respect of the given numerical values.
Even though there is certain correlation between the noise emission level and noise exposure level, it is not a
reliable basis to determine whether or not other preventive measures are necessary. Factors influencing the
actual level of exposure of workers include work space characteristics, other noise sources, etc., i.e. number
of machines and other processes taking place nearby and the time for which an operator is exposed to noise.
Moreover, the permissible exposure level may be different in various countries. This information, however, is to
enable the machine user to better judge the dangers and risks. "
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision of the
trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
GMK 355-2.3: The metal chop saw is solely intended
for the dry cutting of pipes, profiles, flat and round
materials made of steel, aluminium and other non-
ferrous metals using a metal circular saw blade.
WARNING! Do not use cutting discs.
GMK 355-2.3
40558
220-240 V~50Hz
2200 W
1450 min
355 x 25,4 mm 66 Z
120 x 90 mm /180 x 80
mm
90 x 90 mm /120 x 120
mm
90 mm /120 mm
10 x 10 x 90 mm
23 kg
97 dB (A)
110 dB (A)
EN ISO 16093: 2017
Uncertainty K = 3 dB (A)
The shape of workpieces must be designed in a way
to provide safe clamping in the machine vice and to
prevent workpiece jump off during cutting.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Residual risks
Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
noise emissions
dust emissions
vibrations to hand and arms
Danger of burns
Tool and workpiece heat up during operation.
Risk of injury
Sharp tools and workpiece edges
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
ENGLISH
19
-1